Sheetmetal Design using Creo

Her på siden vil du finde de oplysninger du skal bruge for at kunne tage stilling til, om kurset "Sheetmetal Design using Creo" er det rette kursus for dig.

Hvis du har nogle spørgsmål til nedenstående, så er du yderst velkommen til at kontakte os her

Nedenstående indhold er på engelsk for at matche vores kursusmateriale, som også er på engelsk.

Course overview

In this course, you will learn how to create sheetmetal parts in Creo Parametric. The course builds upon the basic lessons you learned in Introduction to Creo Parametric and serves as the second stage of learning. In this course, you will learn how to design sheetmetal parts and assemblies, including sheetmetal production drawings.

All the functions needed to create sheetmetal parts, drawings, and assemblies are covered. Upon completion of this course, you will be able to create sheetmetal design models, create the flat state of the model, and document both in production drawings.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in PTC University Proficiency intended to evaluate your understanding of the course as a whole.
This course has been developed using Creo Parametric. 

Course information:

CAD system: Creo Parametric
Teaching language: Danish
Teaching material: English
Prerequisities: Introduction to Creo Parametric
Duration: 2 days
Price: 9.800 DKK pr. person.

Audience: This course is intended for design engineers, mechanical designers, and industrial designers. People in related roles can also benefit from taking this course.

Sign up:
We hold courses regularly. Some are already scheduled, others are not yet. Contact us to hear more and sign up for the course.

Sign up here

Course objectives:

  • check Create, convert, and display the sheetmetal model.
  • check Use methods of developed length calculation
  • check Use primary and secondary wall features, as well as partial walls
  • check Use bend relief
  • check Use unbend and bend-back features.
  • check Apply sheetmetal bend features.
  • check Use flat patterns.
  • check Create sheetmetal cuts.
  • check Create forms.
  • check Use notch and punch features.
  • check Utilize the sheetmetal environment setup, sheetmetal design information tools, and sheetmetal design rules.
  • check Detail sheetmetal designs.

Var det ikke det rette kursus for dig?

Se vores øvrige kurser i Creo Parametric her

Eller få en snak om hvilket kursus der er det rette for dig.

keyboard_arrow_up